October 17, 2016 / como / 0 Comments
If you’ve had your car for a relatively long time then you’re probably aware that car batteries last only for a period of about two to four years. But, did you also know that you don’t have to throw your car battery away as soon as it goes dead? What if we tell you that there’s a way for you to bring your battery back to life and get it working as if it was brand new? Wouldn’t it be nice if you could extend your battery’s life and not have to buy a new one for at least a few more years?
The good thing is that this is actually possible. Most car batteries can actually be reconditioned and made to work like new with a device called a battery desulfator.
What causes a battery to go dead in the first place?
It is important to learn the answer to this question before you can even begin to understand how a battery desulfator works. A battery’s lead plates normally come into contact with the sulphuric acid content of its electrolytes whenever the battery goes into a discharge. The resulting compound is known as lead sulphate. When the battery is recharged, the lead sulphate is once again broken down into separate lead and sulphur components. However, some of the lead sulphate crystallizes on the battery’s lead plates and does not get broken down. Over time, the crystallized sulphate accumulates until it covers a majority of the lead plates, leaving no room for it to react with the electrolytes and create an electrical charge. This is when we say that a battery is -dead.-
A battery desulfator brings your battery back to life and gets it back to working like new by breaking down the crystallized lead sulphate and clearing up the battery’s lead plates. This way, the lead on the plates can react with the electrolytes properly and your battery can once again hold an electrical charge. Battery desulfation and reconditioning can be done at an automotive shop for a fee, but you can save on the cost by reconditioning the battery yourself. Of course, you’ll have to have your own desulfator for this purpose.
Where to get a battery desulfator
Desulfators can be bought from any automotive store, but why spend that much money when you can actually make the device for much less? The materials needed in making your own battery desulfator can be easily found in your junk box or somewhere around your house. And even if you don’t have them handy, these materials can be bought at very low prices from your local hardware or electronics shop. As for the process itself, you can get some good schematic diagrams and instructions online.
Aside from DIY battery desulfator guides and diagrams, the internet is also rife with reconditioning guides, so the process of both making your own desulfator and reconditioning your own battery is definitely easy enough for you to undertake. As soon as you have completed your desulfator project, you can practice reconditioning an old battery and then perform the process on your existing battery in order to prolong its lifespan.
August 6, 2016 / como / 0 Comments
When anyone attempts a job, maintenance work or possibly a construction project, they really want the end result to be the very best that it will possibly be. If a job is not carried out to the required standard the person responsible will feel extremely disappointed. This would be an awful shame, and in many cases where this happens, the blame won’t lie with the workman for not performing correctly. Inspite of the hard work and effort, an end result can still be a way off being perfect. Why does this occur? It might be as a result of wrong tools being utilized for the job, or the tools that were used for the job being of a low quality. If it is the tool or even the quality of the tool that’s hindering the finished result of a project, it really is an avoidable waste. Can we really make sure that the tools used for a job are perfect and of a high quality and standard each time? This is quite possible when working with Teng tools.
Teng tools are a producer and distributor of the best and highest-quality tools currently available. They feature a variety of over 1800 tools to make sure that everyone is able to find the correct tool they want for the job they need to do. Currently, they distribute tools to some big corporations involved in industry, automotive engineering and aviation industries around the world. Anyone is able to purchase Teng tool products so that they can finish DIY projects to a high standard. Teng tools are widely accessible to buy in the marketplace and each tool carries a lifetime guarantee – evidence of exactly how positive Teng tools are that their products are built to stand the test of time and still retain their quality and endurance. The range of Teng tools out there is extensive and so ensures that for anybody who must undertake a project, whether it is car maintenance or a home DIY project, there are Teng tools available to help one finish the job to the highest quality and standard possible.
The name of the brand originates from a 12th century Japanese folk hero whose name is legendary for power and control. It is these features which Teng tools try and embody in each and every tool they produce. Teng tools give the power and control essential to produce a great piece of work. With the help of customer feedback Teng tools seek to be continuously improving the tools that they make.
With Teng tools, it’s no longer necessary to feel let down with a finished result or feel hopeless when a DIY project has not matched up to original goals. Using Teng tools will assure you achieve the desired result and feel a sense of pride in your work.
May 8, 2016 / como / 0 Comments
When you have a lot of love for and expertise in something, you often feel that you would like to share your passion with other like-minded people. One great way to do that is to start a blog about your hobby. If you love cars, an automotive blog might be just the thing to not only share your insights but to get ideas from your readers.
The word “blog” is a shortening of “web logs.” Blogs are basically sites on which an individual or a company can frequently share new information with interested readers and/or clients. They’re great for getting out news of a new product, keeping family and friends up to date on what’s going on with you, or just to provide an outlet for creative writing. If you are a car enthusiast, it’s very simple to set up and begin contributing to your own blog.
People who love cars are not alone. Neither are people who like to fix cars and are willing to share their tips and tricks. Whether your blog is dedicated to a specific make or model or whether you love to talk about the newest and best in automotive innovation, there are thousands of people who would love to read what you have to say. Ditto for those whose tastes lie in the mechanics of vehicles and who are willing to delve into the ways certain cars can be maintained. Another idea is to review various models, whether you talk specifically about cars from a certain era or class or just like to know what’s available on the market today.
Decide how you want to approach your blogging. Do you want to write the posts yourself and include your own photos or invite guest bloggers and non-copyrighted photos from your readers? How often will you add content to your blog? Who is your target audience?
What will you get out of blogging about cars?
There are blogging websites that offer free blogs to any takers. Within minutes you can choose a template design, come up with a catchy title, and make your first posting. For the money-minded blogger, there are ways to earn cash while indulging in your hobby or passion. By buying a domain name and setting up a website, you can begin letting your blog earn you some money through various advertising methods. An automotive blog that is well written, frequently updated, and that contains relevant information for enthusiasts, DIY mechanics, or those looking to buy a new car has the potential to become a little cash cow for its owner.
Blog about cars for fun or for profit, but enjoy the journey of sharing your experience with others.