February 10, 2016 / como / 0 Comments
Classic trucks can have their ride greatly improved with the replacement of the original front end with a modern independent front suspension. This is something that can be done with almost any make of classic car or old truck.
The main reason for the installation of an independent front suspension on your old truck is to improve the quality of the ride but it can also be done in order to lower the suspension and give the old truck a totally different look. The type of front end you choose may also give your old truck a wider stance.
Depending on the make and model of your old truck you can choose between several types of front ends. For Chevy trucks made between 1947 and 1955 one of the easiest ways is to get the front end of the C10 series Chevy trucks made between 1973 and 1987. The assembly unbolts and comes down complete and can then be bolted to the frame of the old Chevy truck. The whole steering assembly can also be installed to the old truck. This type of suspension is very rugged, has disc brakes and will last forever on classic trucks. But beware: although this is a relatively easy adaptation it can’t be done by an amateur. You will have to take careful measurements of the two frames even before you remove the suspension from the donor C10 truck, especially the steering components if you want to do a good job.
Another type of suspension which has been used in both Ford and Chevy old trucks used to be found in the old AMC Pacer automobile of the late 1970s. This type of suspension also has the advantage of being a complete unit that you can unbolt from the donor car and bolt to the frame of the old truck. A kit for this adaptation is available for sale at many old truck parts distributors.
Among the advantages of this type of suspension is the fact that it comes with front disc brakes and rack-and-pinion steering. The installation of the Pacer suspension is easier to do then the installation of the C10 suspension, but there are a few problems here too. First, it is very difficult to find a Pacer suspension nowadays. The car went out of production well over two decades ago and it wasn’t produced in large quantities to begin with. And even if you find one of these suspensions it will be difficult to get the bushings and other components you’ll need to rebuild it.
By far the best option to improve the ride of classic trucks is to install a modern IFS system produced specifically for your make and model of old truck. There are several companies that do this and their systems are the best you can find, with disc brakes, rack-and-pinion power steering and coilover springs. They are the best and they are also the most expensive. Their prices start a little over US$ 1,000 and go all the up to almost US$ 3,000. But if you can afford one of these you’ll be rewarded with the best type of independent front suspension available today for old trucks.
The Mustang II type of independent front suspension is also a great option for old trucks. You can either find a Ford Mustang II and use its suspension or buy this type of front end ready to install in your old truck. It is one of the strongest you can get and the quality of the ride will make you feel like you’re driving a car.
Now it’s up to you to choose the best IFS for your truck and enjoy the ride!
January 17, 2016 / como / 0 Comments
Man has always been one of the most intelligent living being, with time he has evolved and improvised in order to get the best for himself. Long time ago man carved wheels out of stone in order to use them as easy moving objects and then put a cart on them so he could even move other stuff with the help of these carved wheels. The basic need behind the whole carving of wheels was locomotion of both humans as well as other goods that were heavy to be move. Even the Egyptian pharos are said to have used such wheels and other carved stones and carts to move large stones that were used to build the pyramids, the elephants were bound to these carts who could then have easily pulled the heavy stone blocks.
The same wheels and carts were then fitted with steam powered engines that actually removed the elephants and other animals from the equation and made the whole car as a self-powered object of locomotion and from there the whole concept of cars started evolving and now is at a point of extreme advanced, luxurious and safe method of traveling from point A to point B. The best part of cars now days is that they are in abundance due to the long years this automotive industry has seen therefore buying a second hand car has become extremely easy. Buying a new car is not something that everyone can easily afford and similarly there are millions and billions of people who use their cars and after they have enjoyed it simply sell them away. If you are living in Dubai then you must buy your own car because transportation fare is quiet expensive. It will also help you in enjoying at musandam dibba as well you can save the extra expense by buying a used car if you cannot afford a new car.
The car industry/market is also one of the biggest one in the world where by cars from one continent are bought and shipped by people far away in another continent for example thousands of cars are shipped from the US to countries such as Pakistan and India where by these cars are sold for much more cash than what these cars are worth for in the US because of the currency power difference between these countries. This industry has always been a booming one as used cars are not only easy to buy but at times also have a treat for those who are filthy rich and can easily buy any new cars available in the market but have a special heart or choice of owning old vintage vehicles. People who collect cars are highly benefited from this industry that has its roots globally and are not at all difficult to access because there would have been no other way to get hands at such vintage beauties. 4wd cars that you experience on the desert safari are very much expensive, as they are used royally so to afford such a car is little impossible for a normal person and dreams are dream they do come true one day. Your own conveyance is very much important because you need to pay extra if you want to go to dhow cruise dinner .
Cars are sold as second hand because they are considered to be liquid cash as well, that can be easily sold when required as a financial help and money because cars when kept in good hands could work for more than 2 or even 3 decades. Cars are strong and long lasting commodities and even if kept under harsh conditions can be rebuilt again after ages therefore using the used cars is the best second hand motivating factor.
September 20, 2015 / como / 0 Comments
Plastics have been used in very many aspects of life because of their robust nature, longevity and safety. Plastics undergo numerous molding processes in order to be used in a variety of applications. These molding techniques allow manufacturers to come up with plastics of different shapes. If you want to select plastic automotive fasteners, it is important to identify a manufacturer that can deliver quality products. There are a number of manufacturers who utilizes the best molding techniques and equipment to produce high quality products economically.
Whether you are looking for the finest toothbrushes, automotive body panels or any other plastic items, make sure they have been produced using modern techniques and equipment. For instance, plastic items like backpack buckles need to be produced using effective molding processes if they are to maintain their safe and durable nature. When looking for high quality fasteners which are made of plastics, there are a couple of manufacturers known for their superior quality and affordable products.
Duraflex have produced different plastic products for many years now. You will get Duraflex buckles and fasteners in various sites online. This company not only specializes in high quality fasteners but also affordable military tactical vests. You can get a high quality military tactical vest from an online supplier which offers Duraflex products. Duraflex can produce customized plastic products for any industry. By going through a couple of reviews online, you will certainly agree that this manufacturer has quality plastic products.
When you are purchasing plastic products, it is always important to ensure that you are getting items that have satisfied the highest industry standards. All the products you buy should have a mark that indicates quality. In fact, this is what makes backpack buckles and other products from this manufacturer to earn fame all across the globe. Some of these products are used in very critical environments so the highest quality standards must be maintained.
For instance, if you are buying a military tactical vest, you must be very confident that this item will provide the highest level of protection. This is why the products are manufactured after a series of thorough research done by the US military. Some of these military buckles even come with infrared resistant features.
If you are an avid climber of a backpacker, you need items that you can rely on in critical situations. This is why you are advised to consider Duraflex buckles which have been used by military people because they have proven to be suitable for outdoor adventure. These products are manufactured using the most recent plastic injection molding techniques like the hetero cavity system.
Whether you want to buy plastic automotive fasteners, buckles or military tactical vests, it is always important to get superior quality products. There are a number of sites which offer products from renowned manufacturers like Duraflex. Go through some of these sites and select the items that suit your needs. You will have a great outdoor experience if you have the right gear with you.